Home / Products / Other Portable Testers / Concrete NDT Testing Equipment / Ceramic Tile Bond Strength Pull-Off Tester QualiBond™ 6000
Ceramic Tile Bond Strength Pull-Off Tester QualiBond™ 6000

Ceramic Tile Bond Strength Pull-Off Tester QualiBond™ 6000

Detect weak tile, brick, coating, and insulation bonds before façade failures spread. The portable QualiBond 6000 pull-off tester uses an integrated micro-hydraulic system, digital gauge, peak hold, and 10 kN/MPa readout to deliver fast on-site adhesion checks without bulky lab gear.

Description

Applications

Features

Specifications

Hidden structural delamination in ceramic facades, cladding, and exterior insulation systems presents severe safety hazards and property damage risks on active building sites. The Ceramic Tile Bond Strength Pull-Off Tester QualiBond™ 6000 completely eliminates this diagnostic blind spot, utilizing an integrated micro hydraulic pump to apply smooth, shock-free perpendicular tension for exact adhesion checks.

Weighing just 2.0 kg, this unified, alloy-bodied NDT instrument features a hose-free, one-piece architecture that completely eliminates field setup delays and fluid leak risks on scaffolding or ladders. Its advanced 10-segment polyline correction system secures an exceptional calibration accuracy of 0.001 kN, while an embedded digital gauge delivers direct force (kN) and stress (MPa) readouts with an automatic peak-hold feature that locks the exact moment of bond fracture.

Operating in full compliance with international tensile adhesion and pull-off testing standards, this portable kit delivers traceably certified technical data across diverse construction materials. Whether verifying thin-set mortars, decorative masonry, or EPS/SPS insulation panels, its high-capacity internal memory and over 200 hours of lithium-powered field runtime ensure seamless data tracking to rapidly accelerate project handovers and structural quality audits.

What the Tile Bond Strength Pull-Off Tester Measures

The QualiBond™ 6000 measures the physical adhesion and tensile bond strength of surface-applied materials to their underlying substrates:

  • Direct Tensile Pull-Off Strength: Quantifies the maximum perpendicular tensile force that a bonded material can withstand before separating from the substrate.
  • Adhesive Joint Integrity: Evaluates the quality of adhesive layers, mortars, and bonding agents under real-world mechanical stress.
  • Failure Mode Classification: Helps engineers identify whether a bond failure is cohesive (within the material or adhesive) or adhesive (at the interface between layers).
  • Insulation and Panel Adhesion: Determines the mechanical stability of exterior wall insulation materials, including Expanded Polystyrene (EPS) and Structured Polystyrene (SPS) panels.

Why Pull-Off Bond Strength Testing Matters

In modern civil engineering and building construction, the mechanical adhesion of facade materials is a critical safety and durability metric:

  1. Facade Delamination Prevention: Falling tiles, bricks, or heavy decorative plates present a severe hazard to pedestrians and surrounding property. Regular pull-off testing identifies weak adhesion points before catastrophic delamination occurs.
  2. Quality Control of Adhesives: Verifies that bonding agents and thin-set mortars have been mixed, applied, and cured correctly under variable site conditions.
  3. Project Acceptance and Auditing: Provides third-party inspection teams, contractors, and building owners with standardized, quantitative proof of installation quality before project sign-off.
  4. Insulation Stability Verification: Ensures that exterior wall insulation systems (EIFS) are securely anchored to the structural wall, protecting the building envelope from wind-load damage and moisture infiltration.

The QualiBond™ 6000 is optimized for a broad spectrum of on-site and laboratory building materials testing:

  • Ceramic Tiles and Mosaics: Testing the adhesion of wall and floor tiles in both commercial and residential structures.
  • Decorative Bricks and Plates: Measuring the bond strength of architectural facing bricks, natural stone plates, and cladding materials.
  • Paints and Protective Coatings: Assessing the adhesion performance of industrial coatings, primers, and exterior paints on concrete or masonry.
  • Exterior Wall Insulation Systems: Verifying the mechanical bond of insulation materials, specifically EPS and SPS panels.
  • Specialized Construction Adhesives: Testing the strength of anchoring grouts, polymeric adhesives, and multi-component bonding agents.
  • Infrastructure and Transport Inspection: Screening concrete repair patches on bridges, tunnels, and highway structures to ensure long-term repair adhesion.
  • Integrated Micro Hydraulic System: Designed with a built-in micro hydraulic pump that applies smooth, continuous, and shock-free tension to the specimen, preventing premature failure caused by irregular manual pulling.
  • Embedded Digital Pressure Gauge: Features an integrated digital display that provides direct force readouts in both kilonewtons (kN) and megapascals (MPa), eliminating manual conversion calculations.
  • 10-Segment Polyline Correction: Incorporates an advanced 10-section linear correction system to calibrate the sensor across its entire range, securing an exceptional accuracy of 0.001 kN.
  • Dual Measurement Modes: Offers seamless switching between kN (force) and MPa (stress) based on the size of the test specimen block.
  • Robust One-Piece Construction: The unified, self-contained design contains no external hoses or separate hydraulic cylinders, reducing field setup time and the risk of fluid leaks.
  • High-Durability Alloy Body: Constructed from high-strength lightweight alloy materials, the entire unit weighs just 2.0 kg, making it easy to transport and use on ladders, scaffolding, and hard-to-reach locations.
  • Automatic Power Management: Features a low-power consumption design that automatically shuts down the instrument after periods of inactivity to conserve battery life.

Data Handling and Usability

The QualiBond™ 6000 prioritizes daily operator convenience and secure data traceability in challenging site conditions:

  • High-Capacity Internal Memory: Stores up to 200 individual test records directly on the device, allowing operators to complete extensive site mapping without paper logging.
  • Peak Hold Functionality: Automatically captures and displays the maximum peak force reached at the exact moment of specimen failure, ensuring the ultimate bond strength is recorded accurately.
  • On-Board Data Management: Includes convenient software keys that allow the technician to record, review, and delete historical data points directly on the screen.
  • High-Contrast LCD Lighting: Equipped with a built-in backlight function on the digital display, ensuring clear readability in dark indoor environments, tunnels, or under bright sunlight.
  • Turnkey USB Charging: Powered by a rechargeable lithium battery that provides more than 200 hours of continuous active field operating time and can be charged easily via a standard USB connection.

Measurement Performance

  • Measuring Range: 0 to 10 kN
  • Display Units: MPa and kN
  • Measurement Accuracy: 0.001 kN
  • Hollow Cylinder Stroke: 10 mm
  • Calibration Method: 10-section polyline correction

Instrument Design

  • System Structure: One-piece integrated design (no external hoses)
  • Main Housing Material: High-strength lightweight alloy
  • Display Mode: High-visibility digital LCD panel
  • Unit Net Weight: 2.0 kg

Data and Functions

  • Data Storage Capacity: 200 test items
  • Peak Holding Function: Yes (captures maximum separation force)
  • Data Review and Delete: Yes
  • LCD Backlight Function: Yes

Power

  • Battery Type: Rechargeable Lithium Battery
  • Continuous Operating Time: More than 200 hours
  • Charging Interface: USB Port (with charger included)

Packing List

The QualiBond™ 6000 is supplied as a complete testing kit in a heavy-duty carrying case:

  • Main frame: 1 pc
  • Digital display pressure gauge (built-in): 1 pc
  • Specialized battery charger: 1 pc
  • Specimen blocks (95 x 45 mm): 3 pcs
  • Specimen blocks (40 x 40 mm): 3 pcs
  • Standard AB adhesive glue: 1 set (Note: Adhesive will be removed for air freight or express shipping compliance)
  • Rugged aluminum alloy packing box: 1 pc
  • Operating manual: 1 pc
  • Quality and calibration certificate: 1 pc
  • Packing list: 1 pc

Experience the Qualitest advantage and see how we can elevate your testing and quality control processes.

Please contact us for pricing, check availability, or ask for additional information about:

Ceramic Tile Bond Strength Pull-Off Tester QualiBond™ 6000