Home / Products / Portable Hardness Testers / King Brinell Tester
King Brinell Tester

King Brinell Tester

The king portable brinell hardness tester is the most dependable, easy-to-use, and budget-friendly tool of its kind. It’s the only go-anywhere checker that’s directly verifiable, giving you lasting, correct impressions on almost any metal part you need to check.

The King Brinell gadget is a very versatile and you-can-count-on hardness checking solution put together to accommodate just about every size or form of metal piece you’re working on. Put together for getting it right and made to last, it gives you a very simple checking job while keeping full alignment with ASTM E-110, British Standard #240, Pt.2, Sect.1, and the big rules from JIS.

With the ability to put on up to 3,000 kg of force on a 10mm tungsten carbide sphere, the checker makes a lasting, very exact mark that can be looked at at any point using a Brinell viewing scope, such as the Deep Reading Microscope or the KingScan® IV Automatic Brinell Microscope. The included bypass flow-controller automatically kicks in at the set amount of force to stop any overdoing it, making sure you get the same results in every single check.

Every single gadget is set up to 1/2 of 1% of force, with a complete ability to be tracked back to NIST guidelines, turning it into a choice you can count on for factory-setting Brinell toughness checking.

Extra Add-ons and Component Pieces

King Brinell Tester

The king portable brinell tester line of tools is made to do many jobs, able to check metals in all sorts of forms and dimensions.

  • The Long Ram Test Head lets you do easy checking in sunken spots or over the top of raised edges.
  • The Low Pressure Test Head, which is a great fit for softer metals, provides calibrated force settings that go from 62.5 kgf all the way to 1000 kgf.
  • Outfitted with a Chain Adapter, this checker can work with parts of different sizes using a normal 4′ chain, with longer choices on hand for bigger components.
King Brinell Tester

KING Tester Bases make it simple to check big, high, or wide metal components.

  • C-1 Standard Base: has a 13 1/2″ opening with a 4″ deep space, a good fit for parts up to 8″ across.
  • C-5 Base: has a 13 1/2″ opening and a 6″ deep space, put together for wide parts, including tubes up to 12″ across.
  • C-6 Base: With a 20″ opening and a 4″ deep space, this stand is just right for checking high components like pipes with large openings.
  • C-7 Base: Gives you a 20″ opening and a 6″ deep space, a great fit for checking the biggest parts either on the shop floor or out in the field.
King Brinell Tester

KING Tester microscopes and automatic readers are designed to meet a wide range of testing needs.

  • KingScope: Has a one-of-a-kind nose piece build that needs very little surface work.
  • KingScope 100: A tough, easy-to-carry ASTM Type A scope with 0.01 mm of sureness. It comes with an LED light for fast and simple focusing.
  • KingScope Automatic Digital Microscope: Gives you 0.001 mm of sureness, using a digital camera and a program to see, write down, and keep impressions for on-the-money information handling.
King Brinell Tester

KING Tester Test Blocks are put together for being dependable and not costing a lot, fully traceable and with a serial number, meeting ASTM E-10 guidelines with a 1% wiggle room. The one-of-a-kind etched crosshair design makes getting it right when checking even better.

  • KING Master Test Block (2” x 6”): You can get it in setups like HB 30, HB 15, HB 10, and HB 5.
  • KING Master Test Block (4” x 4”): Works with all Brinell scales. Its bigger size makes your cost for each dent lower, and the etched grid with letters and numbers helps you keep your records straight.

Operating on the true hydraulic Brinell principle (ASTM E-110 / ISO 17025), the King Brinell Tester applies up to a full 3,000 kgf load on a 10mm tungsten carbide ball. Traceable directly to NIST and built to handle extreme industrial environments, this heavy-duty mechanical tester creates permanent, auditable indentations completely independent of part deflection or electronics. Top applications include:

  • Heavy Castings & Large Forgings: Direct, true Brinell testing on massive, structurally rough iron castings and steel forgings on the shop floor or out in the field.
  • Large-Diameter Pipes & Tubes: On-site structural auditing of wide pipes, tubes, and cylindrical components utilizing specialized modular bases (such as the C-6 and C-7 bases) with up to a 20" vertical opening.
  • Recessed or Hard-to-Reach Areas: Executing highly reliable hardness measurements in sunken channels, over raised lips, or inside tight geometric profiles using an optional Long Ram Test Head.
  • Massive Infrastructure & Irregular Assets: Direct testing on high, wide, or arbitrarily shaped structural components via interchangeable flat, dome, and "V" anvils, or wrapping around massive columns with a 4-foot **Chain Adapter**.
  • Softer Metals & Non-Ferrous Alloys: Adapting to aluminum, brass, or soft bronze fabrications by converting to low-pressure workflows (62.5 kgf to 1000 kgf force) with a specialized Low Pressure Test Head.
  • High-Compliance, Auditable Quality Records: Rigorous quality assurance environments requiring permanent physical impressions that can be visually verified at any time using a KingScope, or digitally analyzed for data-logging via the KingScan® Automatic Microscope (0.001 mm accuracy).
The Only Directly Verifiable Portable Brinell Tester

Feature: Fully traceable calibration to 1/2 of 1% of load with full compliance for ASTM E110, ASTM E10, ISO 17025, British Standard #240, and JIS guidelines.
Advantage: The only portable tester on the market capable of direct validation, giving users benchmark lab-level confidence and regulatory compliance directly in the field.

Full 3,000 kgf True Brinell Load

Feature: Delivers up to a massive 3,000 kgf true hydraulic load via a 10mm high-density tungsten carbide ball.
Advantage: Creates a clean, permanent physical indentation that can be re-read and audited at any time using a deep-reading or KingScan®IV automatic microscope.

Automatic By-Pass Valve & Stroke Guard

Feature: Integrated mechanical by-pass pressure valve combined with a built-in stroke guard.
Advantage: Completely eliminates human error and accidental overloading by automatically releasing pressure when target load is met, ensuring parts aren’t damaged.

360° All-Orientation Testing

Feature: Self-aligning architecture designed to operate perfectly right-side up, inverted, or completely on its side.
Advantage: Provides ultimate on-the-spot testing freedom for metal specimens of virtually any size or complex layout without changing orientation.

Swappable Adaptable Test Rests

Feature: Toolless interchangeable base stands including standard flat, dome, and “V” bottom configurations.
Advantage: Seamlessly locks flat sheets, round bars, pipes, or irregular castings securely into position for rock-solid stability during high-pressure cycles.

Factory-Grade Construction & Upkeep Plans

Feature: High-density component design tailored for rugged foundries, backed by an elite 1-year limited warranty and long-term upkeep/re-calibration plans.
Advantage: Withstands intensive everyday use under punishing metal-processing conditions, keeping operational lifetime long and maintenance overhead low.

King Brinell Tester

Technical Specifications

Operation Method/Principle Brinell (Tungsten Carbide ball with a manual hydraulic applied load)
Certifications/Standards ASTM E-10, ASTM E-110, ISO 17025
Dimensions & Weight 23.5″ x 11″ x 12″; 38 lbs.
Scales HB30, HB15
Loads 3000 kgf, 1500 kgf
Load Application Manual
Tester Base Capacity 4″ horizontal reach and 13.5″ vertical (larger bases available)

Experience the Qualitest advantage and see how we can elevate your testing and quality control processes.

Please contact us for pricing, check availability, or ask for additional information about our product

King Brinell Tester