
Tie Scaffold Tester Kit – QualiScaffold™ M2000
Confirm scaffold tie performance before an anchor weakness becomes a collapse hazard. The portable QualiScaffold M2000 follows TG4:19 and TG20:21 guidance, testing common scaffold anchors to 25 kN with a three-legged load-spreading bridge, detachable digital gauge, app support, and 50 mm stroke.
Description
Applications
Features
Specifications
Unverified scaffold wall ties anchored into unstable masonry present life-threatening collapse hazards and extreme regulatory liabilities. The portable QualiScaffold™ M2000 solves this high-altitude risk by applying non-destructive hydraulic tensile proof-loads to verify anchor holding capacity directly on active jobsites.
Engineered for absolute technical accuracy, this 25 kN pull-testing kit ensures strict compliance with ASTM E488, EN 12504-2, and TG4:19 / TG20:21 scaffolding directives. It completely eliminates substrate compression errors by isolating hydraulic reaction forces through an adjustable three-legged load-spreading bridge.
Featuring a detachable digital gauge for cost-effective annual recalibration and seamless mobile app integration, the system drastically maximizes field inspection throughput. The turnkey preassembled kit eliminates manual configuration delays, generating fully traceable, GPS-tagged PDF compliance documentation instantly.
What the Scaffold Anchor Tester Tests
The QualiScaffold™ M2000 is engineered to perform critical mechanical evaluations on a wide range of temporary and permanent structural fixings:
- Scaffold Anchors: Conducts precise proof-load and ultimate-strength testing on wall anchors embedded in concrete, brickwork, or masonry.
- Scaffold Ties: Verifies the physical holding capacity of active scaffold ties, ensuring they can safely resist wind loads and structural shifts.
- Scaffold Ring Bolts: Tests the mechanical stability of ring bolts and eyebolts utilized to secure structural scaffolding frames.
- Standard Construction Fixings: Measures the tensile load capacity of various mechanical and chemical anchors commonly deployed across industrial jobsites.
Why Scaffold Anchor Testing Matters
Scaffolding systems are critical temporary structures used to support personnel, heavy tools, and materials during high-elevation construction. Because these frameworks are held upright primarily by wall ties anchored into varied and often undocumented masonry, verifying anchor reliability is paramount:
- Ensuring Life Safety at Height: Scaffolding collapses present a severe, life-threatening hazard to workers and the public. Routine pull testing with a specialized scaffold anchor testing kit helps prevent catastrophic failures.
- Strict Safety Guidance Compliance: Modern health and safety standards, including regional Guidance Notes TG4:19 and TG20:21, mandate that all scaffold anchors must be systematically tested and certified at the point of installation.
- Overcoming Substrate Variability: Visual inspections cannot identify weak mortar joints, pocket voids, or chemical adhesive failures. Applying a direct physical load with the QualiScaffold™ M2000 provides undeniable, empirical proof of holding capacity.
- Optimizing Operational Rigor: Standardized proof-load testing helps reduce structural uncertainty, allowing site managers to establish clear, documented compliance records before scaffolding is loaded.
The QualiScaffold™ M2000 is optimized for rapid, reliable verification across diverse construction and auditing environments:
- Scaffold Tie Verification: Auditing the installation quality of ring bolts and anchors on commercial and high-density residential scaffolding.
- Geotechnical and Masonry Testing: Assessing the safe working loads of fixings anchored into brickwork, natural stone, or light concrete blocks.
- Active Field Quality Control: Conducting on-site spot checks during scaffolding assembly and routine weekly safety audits.
- Confined Space Operations: Operating efficiently on narrow platforms, ladders, and tight structural alcoves where compact portability is essential.
- Civil and Transport Infrastructure Auditing: Scanning and testing anchoring systems on bridge restorations, tunnel linings, and industrial facilities.
- High-Contrast Digital Gauge: Outfitted with a 0 to 25 kN dual-scale digital display that delivers direct, clear readouts in both kilonewtons (kN) and pounds-force (lbf).
- Detachable Sensor Module: The digital gauge is fully detachable, allowing users to ship only the gauge head back for annual recalibration. This design drastically reduces shipping logistics and carrier-return costs.
- Free Mobile App Integration: Fully compatible with our latest free-to-use mobile application, enabling operators to log test curves, record GPS coordinates, and generate PDF reports instantly on-site.
- Turnkey Preassembled Assembly: The tester arrives preassembled, allowing field technicians to attach required adaptors and begin active testing within minutes.
- Low-Torque Turning Handle: Features an ergonomic handle with an integrated 22 mm (7/8 inch) nut, enabling smooth and continuous load application even in restricted-access areas.
- High-Stroke Travel Capability: Provides a physical piston stroke of up to 50 mm, allowing for the precise tracking of initial anchor slip and ultimate pull-out limits.
- Robust Protective Carrying Case: Supplied in a highly durable carrying case designed to organize the preassembled tester, digital gauge, and a comprehensive set of scaffold adaptors for secure transport.
- Calibrated Confidence: Includes an official gauge calibration certificate valid for 12 months, ensuring absolute data integrity for compliance reporting.
Load-Spreading Bridge and Accuracy Support
A major source of reading error in high-load testing is the localized substrate crushing caused by the tester’s reaction forces. The QualiScaffold™ M2000 addresses this through the integration of the advanced LSB 2020 load-spreading bridge:
- Isolating Reaction Forces: The three-legged bridge configuration successfully diverts and keeps reaction loads away from the immediate anchor zone. This ensures that the tester measures the true, unassisted tensile strength of the scaffold tie, preventing false results caused by localized downward compression.
- Unmatched Setup Flexibility: Features height-adjustable legs, a four-position pin arrangement, and swivel feet with a 15 mm fine-adjustment thread. This modular design allows for flat, stable placement across irregular brickwork, claddings, and non-planar wall faces.
- Perpendicular Alignment: By establishing a secure 116 mm footprint between feet edges, the bridge guarantees that the tensile load is applied perfectly perpendicular to the concrete face, eliminating shear forces and ensuring maximum repeatability.
Adaptors and Kit Configuration
The QualiScaffold™ M2000 is supplied as a complete, comprehensive testing system featuring high-precision adaptors:
- M12 Ringbolt Adaptor Clevis: A high-strength clevis attachment designed to hook directly into standard M12 ring bolts and scaffold tie eyes.
- Bolt Tester Adaptor with M12 Locking Adaptor: Secures a robust mechanical interface with the fastener during high-tensile load applications, preventing slipping or dangerous sample release.
- M16 Threaded Stud Adaptor: Engineered to connect seamlessly with M16 threaded studs.
- M16 Hexagon Set Screw: High-strength screw for securing modular stud attachments.
- M16 Threaded Stud: Standard-compliant stud projection for high-load anchoring interfaces.
- Included Kit Elements: The standard package contains the preassembled tester, the LSB 2020 load-spreading bridge, the detachable digital gauge (with 12-month calibration certificate), the charging adapter, the turning handle, and comprehensive operating instructions, all organized inside the durable protective carrying case.
Load and Stroke Performance
| Parameter | Specification |
| Pull-Out Load Range | 0 to 25 kN (0 to 5620 lbf) |
| Piston Stroke | Up to 50 mm (Up to 1.97 inches) |
| Operation Method | Manual low-torque turning handle with 22 mm (7/8″) integrated nut |
| Measuring Scale | Integrated linear displacement scale |
Physical and Mechanical Details
| Parameter | Specification |
| Tester Weight (Unit Only) | 2.2 kg (4.85 lbs) |
| Load-Spreading Bridge (LSB) Footprint | 116 mm (4.57 inches) between feet edges |
| LSB Fine Adjustment | Swivel feet with 15 mm fine thread adjustment |
| LSB Height Settings | Height-adjustable legs with 4-position pin arrangement |
| Protective Carrying Case Dimensions | 571 x 382 x 160 mm (22.48 x 15.04 x 6.30 inches) |
| Total Carrying Case Weight (Full Kit) | 10 kg (22.05 lbs) |
Service and Consumables
| Parameter | Specification |
| Recommended Hydraulic Oil Type | ISO VG 32 Mineral-based oil |
| Oil Replenishment Method | Via supplied oil bottle with the aid of a piston key |
| System Warranty Period | 12 Months |
| Analog Model Part Number | 200-014 |
| Digital Model Part Number | 200-015 |
Experience the Qualitest advantage and see how we can elevate your testing and quality control processes.
Please contact us for pricing, check availability, or ask for additional information about:




